Hunan Jetvision Industrial CO.,LTD
Customised Cemented Carbide Components Producer And Exporter
Customised Cemented Carbide Components Producer And Exporter
Cemented Carbide Brazed Tips refer to a specific grade and style of cutting inserts or tips that are brazed (joined using a filler metal) onto tool holders, commonly used in metal cutting, turning, milling, or boring operations.
Cemented carbide brazed tips are small cutting inserts made of tungsten carbide (WC) bonded with a metal binder (usually cobalt), which are brazed (permanently soldered) onto a steel tool holder or shank. These tips form the cutting edge of the tool.
They're used extensively in metal cutting operations, especially in turning, milling, planing, and boring.
Typical Applications: Turning tools;Milling cutters;Boring bars;Planing tools;Woodworking (hard woods, MDF), etc
Advantages
|
Feature |
Benefit |
|
High hardness |
Excellent wear resistance and tool life |
|
High heat resistance |
Performs well in high-speed, high-temp cutting |
|
Versatile cutting edge |
Suitable for both roughing and finishing |
|
Cost-effective |
Lower cost than indexable carbide tools in some use cases |
Grade
|
ISO Code |
Grade |
Physical and mechanical properties |
Applications recommended |
||
|
Density g/cm |
Hardness HRA(HV) |
TRS Mpa |
|||
|
K05-K10M20 |
YT26 |
14.0 |
92.5 |
1600 |
Suitable for fine and semi-finishing machining of chilled cast iron and non ferrous metals withgood performances of theirfreeze resistance and wear resistance, also suitable for turning and millingmanganese steel and hardened steel |
|
M05-M10 |
YS8 |
13.9
|
92.5 |
1720 |
It can be used for the finishing of iron based and nickel based high-temperature alloys and high strength steel and it can also be used for the finishing of chilled cast iron,heat resistant stainless steel, highmanganesesteel andhardened steel. |
|
M10 |
YW3 |
12.8 |
92.5 |
1500 |
Commonly used deep-drawing shaping die, wear parts, also used for cold rolls, powder forming dies, non-magnetic materials, molds used for magnetic field press molding, corrosion-resistant tools. |
|
M20 |
YM20 |
13.0 |
91.0 |
1750 |
Steel, cast steel, manganese steel, gray cast iron, semi-finish turning and semi-finish milling at medium cutting speeds and feeds. |
|
P35-P40 |
YC40 |
12.90 |
91.0 |
2200 |
Suitable for the heavy duty turning of steel and cast steel with a big feel rate under unfavorable working condition. |
|
P40 |
YM40YC45 |
12.75 12.75 |
90.0 90.0 |
2100 2300 |
Suitable for the heavy dutycutting of steel and caststeel with a big steel rate and also for face milling. |
|
K05 |
YG3 |
15.0 |
90.5 |
1300 |
Suitable for finishing of cast iron and nonferrous metal |
|
K10 |
YG6X YG6A |
14.8 14.7 |
91 91.5 |
1560 1510 |
The finishing &semi-finishing of cast iron and nonferrous metals and also forthe machining of manganese steel and hardening steel |
|
K15 |
YG6 |
14.9 |
89.5 |
1670 |
Suitable for the roughing of cast iron and light alloys and also for the millingofcast iron and low-alloy steel |
|
K20 |
YG8 |
14.6 |
89.0 |
1840 |
|
|
M10 |
YW1 YW3 YW4 |
13 12.9 12.3 |
91 92 92 |
1290 1390 1390 |
Suitable for finishing and semi-finishing of stainless steel and conventional alloy steel. |
|
M20 |
YW2 |
12.9 |
90.5 |
1460 |
The grade can be used for the semi-finishing of stainless steel and low alloy steel and it ls mainly used for the machining of railway wheel hubs |
|
P10 |
YT05 YT15 |
12.6 11.3 |
92.5 91.0 |
1260 1300 |
Suitable for the finishing and semi-finishing of steel and cast steel with a moderate feed rate and a rather high cutting speed. |
|
P20 |
YS14 YT14 YS25 |
11.4 11.4 13.0 |
91.5 90.5 90.5 |
1550 1400 1780 |
Suitable for the finishing andsemi-finishing of steel and cast steel. YS25 is specially used for the milling of steel and cast steel |
|
P30 |
YT5 |
12.8 |
89.5 |
1560 |
Used for the milling of steel,cast steel and alloy steel |
Standard Tip Shapes (based on ISO/GB standards)
|
Shape Code |
Description |
|
C |
Square |
|
D |
Diamond (55°) |
|
S |
Round/Disc |
|
T |
Triangle |
|
W |
Trigon (80°) |
|
R |
Rectangle |
These shapes determine the cutting geometry and how the tip engages with the workpiece.
Tip Grades (Example)
|
Grade |
Typical Use |
|
YG6 |
General-purpose for cast iron |
|
YG8 |
Higher toughness, rough cutting |
|
YT15 |
Steel finishing |
|
YT14 |
Steel semi-finishing |
|
YT5 |
Steel roughing |
|
Type |
Dimensions(mm) |
||||
|
|
L |
t |
S |
rε |
f |
|
C110A |
10 |
6.5 |
2.5 |
0.5 |
1.6 |
|
C116A |
16 |
8 |
3 |
0.5 |
2.5 |
|
C120A |
20 |
10 |
4 |
0.5 |
3.5 |
|
Type |
Dimensions(mm) |
|||||
|
L |
t |
S |
rε |
e |
α° |
|
|
C110A |
10 |
4 |
3 |
0.5 |
- |
- |
|
C116A |
16 |
6 |
4 |
0.5 |
0.8 |
10 |
|
C120A |
20 |
8 |
5 |
0.5 |
0.8 |
10 |
|
C122A |
22 |
10 |
6 |
0.5 |
0.8 |
10 |
|
C125A |
25 |
12 |
7 |
0.8 |
0.8 |
10 |
|
Type |
Dimensions(mm) |
||||||
|
R.H |
L.H |
L |
t |
S |
R |
e |
α° |
|
B312 |
B312Z |
12 |
8 |
4 |
8 |
3 |
0.8 |
|
B315 |
B315Z |
15 |
10 |
5 |
10 |
5 |
0.8 |
|
B318 |
B318Z |
18 |
12 |
6 |
12 |
6 |
0.8 |
|
B322 |
B322Z |
22 |
16 |
7 |
16 |
10 |
0.8 |
|
Type |
Dimensions(mm) |
|||||
|
|
L |
t |
S |
R |
e |
α° |
|
B208 |
8 |
8 |
3 |
4 |
- |
14 |
|
B210 |
10 |
10 |
3.5 |
5 |
0.8 |
14 |
|
B212 |
12 |
12 |
4.5 |
6 |
0.8 |
14 |
|
B214 |
14 |
16 |
5 |
8 |
0.8 |
14 |
|
B216 |
16 |
20 |
6 |
10 |
0.8 |
14 |
|
B220 |
20 |
25 |
7 |
12.5 |
0.8 |
14 |
|
B225 |
25 |
30 |
8 |
15 |
0.8 |
14 |
|
B228 |
28 |
35 |
9 |
17.5 |
0.8 |
14 |
A1 Type
|
Type |
Dimensions(mm) |
||||
|
|
L |
t |
S |
e |
α° |
|
A106 |
6 |
5 |
2.5 |
- |
0 |
|
A108 |
8 |
7 |
3.0 |
- |
0 |
|
A110 |
10 |
6 |
3.5 |
0.8 |
14 |
|
A112 |
12 |
10 |
4.0 |
0.8 |
14 |
|
A114 |
14 |
12 |
4.5 |
0.8 |
14 |
|
A116 |
16 |
10 |
5.5 |
0.8 |
14 |
|
A118 |
18 |
12 |
7.0 |
0.8 |
14 |
|
A118A |
18 |
16 |
6.0 |
0.8 |
14 |
|
A120 |
20 |
12 |
7.0 |
0.8 |
14 |
|
A122 |
22 |
15 |
8.5 |
0.8 |
14 |
|
A122A |
22 |
18 |
7.0 |
0.8 |
14 |
|
A125 |
25 |
15 |
8.5 |
0.8 |
14 |
|
A125A |
25 |
20 |
10.0 |
0.8 |
14 |
|
A130 |
30 |
16 |
10.0 |
0.8 |
14 |
|
A136 |
36 |
20 |
10.0 |
0.8 |
14 |
|
A140 |
40 |
18 |
10.5 |
1.2 |
14 |
|
A150 |
50 |
20 |
10.5 |
1.2 |
14 |
|
A160 |
60 |
22 |
10.5 |
1.2 |
14 |
|
A170 |
70 |
25 |
12 |
1.2 |
14 |
Русский язык
