Tungsten Carbide Wear Plates Agriculture Inserts For cultivator Points
With a wide variety of tillage tools and parts like field cultivators, sweeps, tines, furrowers, plow shares, moldboards, shins, chisel and subsoiler points, ripper points, oil bath bearings, hipper parts and other tillage tools, Quality Farm Supply has everything you need to break ground, without breaking the bank. Our products fit models like Allis-Chalmers, Case IH, John Deere, Krause, Rome, Sundance, Towner, Sunflower and more.
The search of increased productivity in agricultural tasks, carbide materials allow greater acreages to be worked, is increasingly more frequent, because they resist wear and do not fracture despite the heterogeneity of the soil.
So carbide wear plates are widely applied to agriculture with its good wear resistance and high heat resistance.
Tungsten carbide inserts/strips/blades for woodworking tools, VSI stone cutting machine, feed mill, and agriculture tillage tools. Cemented Carbide rectangular blanks for mining, earthmoving, and agricultural industries. We offer a wide selection of cemented tungsten carbide strips to meet specialized needs. Our nickel binder grades are ideal for the most demanding conditions in which corrosion, oxidation and wear push your tooling to the limit. Hard metal strips can be manufactured to any size, any shape according to client's specification with appropriate grades, competitive pricing and prompt delivery.
Technic
of Cultivator Sweeps with Tungsten Carbide point:
1. Investment casting, Lost wax casting,Precision casting, Lost
foam casting, Water glass casting, Silica sol casting,Sand casting,quartz sand
casting technics, Furan resin sand casting, phenolic resin sand casting
technics.
2. Casting tolerance: Lost wax casting Tolerancing Standards ISO/GB
CT7~9;Sand casting Tolerancing Standards: ISO/GB CT10~12.
3.Advantages:Good abrasive resistance; Long service life; Good heat and corrosion resistance; Quality guaranteed
Grade information
Material
of Cultivator Sweeps with Tungsten Carbide point:
1. Castings: Carbon Steel, Alloy Steel, Stainless Steel, High Mn
Steel,ASTM/AISI/UNS (AISI 1020,AISI 1030,AISI 1045, AISI 4140, AISI 4130, AISI
4330,AISI 8630, AISI 8620, AISI 8640, etc;
2. Tungsten carbide: YG8,YG10,YG11C,etc.
Grade |
Density g/cm3 |
T.R.S MPa |
Hardness HRA |
Performance & Application recommended |
YG10 |
14.50 |
3400 |
92.5 |
Qualified for low speed rough machining,milling,titanium alloy and refractory alloy,espercially for cut-off tool and sick prick. |
YG11C |
14.40 |
2260 |
87.5 |
Qualified for molding the drills for heavy-duty rock drill:detachable bits used for deep hole drilling,rock drill torlley etc. |
YG6X |
14.90 |
1560 |
91.0 |
Qualified for machiningof chilled cast iron,alloy cast iron,refractory
steel ana alloy steel.Also qualified for the machining of |
YS2T |
14.45 |
2800 |
92.5 |
Qualified for low speed rough machining,milling,titanium alloy and refractory alloy,espercially for cut-off tool and sick prick. |
YG15 |
14.10 |
2400 |
86.5 |
Used for punch dies,stamping dies and wear resistance parts. |