Our tungsten carbide needles are perfect
for filing precise shapes into carbon fiber.
The needles are made from mild steel with tungsten carbide welded onto them.
The needle will cut in both directions meaning they will remove material much
quicker than conventional needles and leave a clean edge without fraying or cracking
carbon fiber or other composites.The tungsten carbide is incredibly hard
wearing and will not lose its edge or wear off. These tools will provide you
with years of faithful service and are a must have for detailed carbon fiber
work.
Suggested Uses
This half round needle is one of the most useful shapes and is perfect for
smoothing out the inside of curved cuts (like cuts for dials), cutting tools,
drill bits and finishing recesses cut in dash panels for lights etc. It is also
invaluable for finishing rounded slots in bonnet scoops or engine bay mods.
How to Use
Open up a hole (if required) with a drill or wheel first then use the needle in
a conventional way to finish a slot or edge, working gently and smoothly.
Size of the high pure tungsten needle:
Diameter 1.5*length 7mm, diameter 1.5*length 8mm, diameter 1.5*length 9mm, diameter 2.0*length 15mm. Contact us for more customized size and requirement.
Drawing of tungsten needles: